Specialty Blenders of Heritage Lubricants

GREEN VELVET STEAM CYLINDER OIL
INFORMATION AND PRICING

Sapon-A-Max Formula 3 (ISO460) is the lightest of the true cylinder oils. It is intended for steam pressures under 160 psi, saturated steam conditions and smaller cylinders (typically under 8" bores).  Live Steamers this is your oil!  It has plenty of soft, smooth lard oil compounding and tough glazing additive to lubricate wet cylinders and prevent rust after shutting down.

1 pint bottle = $8.70
1 case of 12 pint bottles = $104.40
1 quart bottle = $16.86
1 gallon bottle = $39.64
5 gallon pail = $158.40
bulk drums = call 606-376-3035 for quotation *

Sapon-A-Med Formula 2 (ISO680) is our medium grade cylinder oil.  It is made for higher steam pressures up to 230 psi, larger cylinder bores such as found on full size locomotives and conditions where moderate superheat temperatures are reached.  Tourist and Heritage Railroads this is your oil! It has the extra solid viscosity needed for higher steam pressures and heavier loads. Tallow oil compounding and a film/surface modifier additive ensure water and rust resistant films during operation and long after shut down. Call to order - 606-376-3035.

1 quart bottle = $16.78
1 gallon bottle = $39.30 
5 gallon pail = $156.68   
bulk drums = call 606-376-3035 for quotation *

Sapon-A-Min Formula 3 (ISO1000) is our heaviest grade of compounded cylinder oil.  It is made for moderately high steam pressures up through 350 psi (at the engine inlet) and higher superheat temperatures up to 650° F.  It is an excellent cylinder lubricant for large type E superheater locomotives that don't return condensate to the boiler with feedwater heaters (Elesco type).  It is well adapted to Stanley and other steam cars that operate non-condensing.  Non-condensing Steam Automobile Operators this is your oil!  It is a full bodied high viscosity oil that will stand up to the high piston speeds and high superheat temperatures in all non-condensing steam car applications.  Tallow oil compounding and a film/surface modifier additive ensure water and rust resistant films during operation and long after shutdown.  This is a dark opaque oil that shows up well in winkers.  This oil should not be used in condensing steam cars because the compounding cannot be easily separated in the water tank.

1 quart bottle = $16.91
1 gallon bottle = $39.82 
5 gallon pail = $159.29    
bulk drums = call 606-376-3035 for quotation *

Sapon-A-Non1000 Formula 1 (ISO1000) is our heavy duty non-compounded cylinder oil.  It is identical to the Sapon-A-Min formula 3, but contains no animal fat compounding.  It is ideal for condensing Stanley and other steam cars that do not have heavy enough mechanical lubricators to pump Sapon-A-Non1500 Formula 1.  It is made for steam pressures up through 350 psi (at the engine inlet) and superheat temperatures up to 650° F.  Condensing Steam Automobile Operators this is your oil!  It is a full bodied, high viscosity oil that will build efficient lubricating films in dry, superheated engines.  It contains a hydrophobic film/surface modifier additive that assists with virtually complete condensate separation in the water tank for efficient oil removal prior to pumping condensate back into the boiler.  The film/surface modifier additive also forms "skins" that ensure water and rust resistant films during operation and long after shutdown.  This is a dark opaque oil that shows up well in winkers.

1 quart bottle = $16.86 
1 gallon bottle = $39.64 
5 gallon pail = $158.37    
bulk drums = call 606-376-3035 for quotation *

Sapon-A-Non1500 Formula 1 (ISO1500) is our heaviest grade cylinder oil. It is made for the highest steam pressures up through 700 psi, and high superheat temperatures up to 700° F. This lubricant contains no animal fat compounding and is an excellent lubricant for high pressure, high temperature, condensing steam engines with superheat in the exhaust.  Late Model Stanley and Doble Steam Automobile Operators this is your oil!   It is equivalent to the popular, now discontinued Exxon Cylesstic TK1500 steam cylinder oil and contains the same film/surface modifier that fortified that lubricant.  This is a dark opaque oil that shows up well in winkers.

1 quart bottle = $16.74 
1 gallon bottle = $39.15 
5 gallon pail = $155.96    
bulk drums = call 606-376-3035 for quotation *

Click here for application information on condensing marine steam power plants

Shipping and Handling Charges (per bottle/pail - continental US only)

1 pint bottle = $10.00
1 quart bottle = $11.00   
1 gallon bottle = $15.00   
5 gallon pail = $29.00   

All underlined prices can be ordered online via PayPal - click here to order
*All other items can be ordered via telephone or mail with credit card or check

Telephone  606-376-3035 
8:00am to 5:00pm Eastern Time Zone   
Mail to P.O. Box 1010
Stearns, KY  42647

All prices subject to change without notice

Want to learn more about the above and other Green Velvet Steam Cylinder Oils? 
CLICK HERE for downloadable pdf specification pages